Qingdao Jiachun Machinery Co., Ltd.

one of the largest textile machinery manufacturers in China, specializing in Water jet loom/Air jet loom/Non-woven machinery/Woodworking machine, having experience of more than 14 years in this industry!

Home > News > Content
Wfb-At600 Fully Automatic Non-Woven Bag and Handle Integrated Machine
- Jan 18, 2017 -
Basic Info
  • Model NO.: WFB-AT600

  • Voltage: 220V

  • Speed: High

  • Sealing & Cutting: Ultrasonic Sealing and Cold Cutting

  • Machine Type: Bag Forming Machine

  • Type: Non-Woven Bag Making Machine

  • Max.Bag Making Width: 600mm

  • Max.Bag Making Length: 700mm

  • Lines: 1

  • Seals Mode: Trilateral Seals

  • Continuous-Rolled: No

  • Layer: Single

  • Computerized: Computerized

  • Model: Wfb-At600

  • Bag Making Thickness Range: 20-100g

  • Overall Demensions: 12000*2000*2100mm

Product Description
WFB-AT600 Fully Automatic Non-woven Bag and Handle Integrated 



Main Introductions
This machine is the present domestic function is the most complete, the performance is the most stable automatic non-woven bag making machine. On the basis of the original bag making machine, add automatic bonding handle. That is real liberating manual and fully automatic production of non-woven bag. It compared with the similar machine, higher precision, less waste, faster and achieved maximum benefit for you.

Performance and Characteristics
This machine widely used in producing non-woven handle bag, flat bag, box bag, T-shirt bag, organ bag,gift bag, pillow bag, zipper bag, draw string bag, etc. The produce different bags as long as change the way of material. It is simple operation, high efficiency and good stability. The whole machine adopts microcomputer control and material pulling by stepping motor. Automatic positioning and bonding handle. It arbitrary fixed length, accurate and stable step photoelectric tracking, automatic punching, counting, alarming and stopping when the label is lost.

Main Technical Parameters
ModelWFB-AT600
Max.Bag Making Width600mm
Bag Making Thickness Range20-100g
Max.Bag Making Length700mm
Production Speed40-90pcs/min
Total Power16kw
Machine Weight3.5t
Overall Demensions12000*2000*2100mm
 
1) Main motor with frequency conversion(made in Shanghai), speed can be adjusted
2) Micro-computer controlled stepping motor
3) Pneumatic shaft axis
4) EPC(edge position control) controls material running
5) Side-folding,heating with electrical temperature-controlled
6) PLC is made in Simens
7) Tachometer shows as the material runs
8) Adjusted lever with air cylinder tension control
9) Ultrasonic made in Jiangsu,Japan Chip,YDN Brand
10) Photocell tracks the printing material


Spare parts for free:
1) Tool case,1 set
2) Spring,50 pieces
3) DC speed-adjust board,1 piece
4) Thermocouple,2 pieces
5) Heating-piece,2 pieces
6) Shift switch,1 pieces
7) Potentiometer,2 pieces
8) Solid Contactor,1 piece
9) Thermometer,1 piece
10) Manual Instruction,1 piece


Spare parts(below suggest to be bought extra for one year):
NameQuantity for 1 yearTotal Amount
1) DC motor1 pieceUSD 250 
2) Untrasonic1 setlong head,USD 700;          round head,USD 400
3) Photocell 1 pieceUSD 100
4) Stastic eliminator1 pieceUSD 50
5) Stastic bar2 piecesUSD 20
6) DC speed-adjust board1 pieceUSD 20
7) Thermometer2 piecesUSD 100
8) Solid Contactor2 piecesUSD 20
9) Heating-piece6 piecesUSD 80
10) Shift switch3 piecesUSD 50
11) Potentiometer5 piecesUSD 20
12) Thermocouple5 piecesUSD 20
13) Spring400 piecesUSD 100
14) Heating moudle under the cutting knife1 pieceUSD 200
15) Cutting knife1 pieceUSD 150
16) Stepping motor and driver1 setUSD 500


Guarantee period and maintenance:
Seller guarantees that the equipment is accordance with the function and requirement without manufacturing defects. The guarantee period is one year after the installation and adjustment.
Buyer is responsible for the costs including maintenance and spare parts if the equipment damage is caused by the buyer's improper use, not caused by the seller's design and manufacturing.
If the buyer needs seller to send an engineer the installation and training. The buyer should cover the all of expense for the seller's engineers, such as, air-tickets, visa, accommodation and local traffic charges, salary(USD 80/day) in buyer's side. And the buyer should do his best to cooperate the engineers of sales parts in installation, supply the enough labor and tools, necessary accessory with them.